enclosed flow cell
Thomas Delohery (t-delohery@ski.mskcc.org)
Thu, 8 Sep 1994 17:41:11 +0530
Hi all, thanks for the PMT info.. Next question - is anyone using
BD's enclosed flow cell for sorting? BD sells it primarily
as a bio-containment adaption for their sorters and someone
mentioned that the added mass of the quartz cuvette on the
nozzle tip may require the strength of a MacroSort drop-drive
in order to get a reasonable break-off. I'd appreciate hearing
from anyone who has any experience with this nozzle.
thanks tom d.
--
==============================================================================
Tom Delohery | Internet: t-delohery@ski.mskcc.org
Manager, Flow Cytometry Core Facility | Phone: (212) 639-8729
Memorial Sloan-Kettering Cancer Center | Fax: (212) 794-4019
==============================================================================
CD ROM Vol 2 was produced by staff at the Purdue University Cytometry Laboratories
and distributed free of charge as an educational service to the cytometry community.
If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL,
Purdue University, West Lafayette, IN 47907. Phone:(317) 494-0757; FAX (317) 494-0517; Web http://www.cyto.purdue.edu
EMAIL robinson@flowcyt.cyto.purdue.edu