PI,PE,FITC
kweber@vs4.im.med.umich.edu
Wed, 10 May 1995 08:06:39 -0400
Just a quick return to the subject of PE,PI staining. I mentioned that we were
going to try a 685bp for the PI. Well, we did, and it was clearly too far.
The PI intensity was cut down way too far, and we had to turn up the subtraction
of PE-PI to above 60% where if we used the 675bp we could get away with only
10%. So, if you were planning on trying this, don't bother.
Kris
CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the
Purdue University Cytometry Laboratories and distributed free of charge
as an educational service to the cytometry community.
If you have any comments please direct them to
Dr. J. Paul Robinson, Professor & Director,
PUCL, Purdue University, West Lafayette, IN 47907.
Phone: (765)-494-0757;
FAX(765) 494-0517;
Web
http://www.cyto.purdue.edu
, EMAIL
cdrom3@flowcyt.cyto.purdue.edu