Re: FACS calibur filter problems

Simon Monard (Simon_Monard@adarc.org)
Thu, 10 Apr 1997 09:26:16 -0400

Hi

On my FACS Calibur I never get this problem, there is almost an inch
clearance between the sheath tank cap and sensor unit and the filter. Maybe
your instrument has been assembled incorrectly, if still under warrenty I
would complain bitterly until they fix it. Under the drawer on mine there
is about 3/4 of an inch clearance, is your drawer mounted too high?

Simon Monard
Aaron Diamond Center
NYC


Home Page Table of Contents Sponsors E-Mail Archive Web Sites

CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the Purdue University Cytometry Laboratories and distributed free of charge as an educational service to the cytometry community. If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL, Purdue University, West Lafayette, IN 47907. Phone: (765)-494-0757; FAX(765) 494-0517; Web http://www.cyto.purdue.edu , EMAIL cdrom3@flowcyt.cyto.purdue.edu