 |
 |
 |
 |
 |
Of course, you will need an ethernet connection and TCP/IP software for your
PC too. They're available from numerous sources, including the two
mentioned above.
There are several other options for electronic connections besides ethernet.
Verity Software sells a product, called "WHPPC" to connect a PC to the HP
through the HPIB adapter. It's about as fast as ethernet and fairly easy to
use.
If you have Web access, you could also check Eric Martz' catalog of free
flow cytometry software for more options:
http://www.bio.umass.edu/mcbfacs/flowcat.html
Good Luck!
Neal
At 06:42 PM 11/13/96 +-200, you wrote:
>
>Hello!
>
>We have a FACSort cytometer with a HP340 system, which has a net adapter
with BNC connector (thin coax). Has anyone heard about some software that
will allow me to connect the HP workstation with a PC compatible through an
Ether adapter?
>
>Thank you.
>
>Eugen Radu
>Faculty of Medicine Craiova
>Dept. Immunology
>Romania
>
-- Neal A. Benson Biotechnology Program, University of Florida E-mail: nbenson@biotech.ufl.edu
|
|
|
|
|
|
CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the
Purdue University Cytometry Laboratories and distributed free of charge
as an educational service to the cytometry community.
If you have any comments please direct them to
Dr. J. Paul Robinson, Professor & Director,
PUCL, Purdue University, West Lafayette, IN 47907.
Phone: (765)-494-0757;
FAX(765) 494-0517;
Web